Did you try adjusting the drop speed? Does the plow come down fast now until it hits the ground? You can see a rust ring on the Lift Ram, like that is where a previous owner always had it. IF the...
Type: Posts; User: admin
Did you try adjusting the drop speed? Does the plow come down fast now until it hits the ground? You can see a rust ring on the Lift Ram, like that is where a previous owner always had it. IF the...
The original ground I think just about all plow manufacturers use is 6 gauge. I'd use 2 gauge if it came through my door. If it has a single lug motor (since you said it is older) it may be losing...
Hook up the angle hoses and angle the plow. IF the motor sounds the same, it could be a weak motor. I don't hear the pump going into relief, like the motor does not have the balls to do it. I know it...
Lets start with the not lifting all the way. As you said, a gauge will tell you what is going on more. There was a small fat O Ring in the E-60 Basic Seal Kit you got. That goes on the back of the...
Not sure why, but the F-150 has always seemed to me to be somewhat uncommon. I have enough fingers to count how many I have seen around here in the past 15 years or so, not many! I have also never...
Sometimes they can be almost impossible to get out.
~Admin
Meyer E-60 related Service Bulletins
December 2012
15967 PA Block Replacement Kit (PA Block 16016)
SB 240
January 2004
One other thought. The picture you put up is an EZ Classic. Back in 83, that truck would have had a Custom Classic or (later called) EZ Custom on it. The spacing of the ears on the A Frame may not...
It will fit no problem. Since they took the mount off with the Lift Frame still in it, I am guessing it is not going to come out easy (VERY common problem). You say "E-47 plow" but the E-47 is a...
Read this first: http://www.meyerplows.info/replace-a-meyer-plow-standard-lift-with-an-h-model.html
~Admin
2-1-18 My Meyer Plow Info Checklist - A checklist you can download and use to record the various parts of your plow system. Before you can find the help you are looking for, you NEED to KNOW what you...
http://www.smithbrothersservices.com/2007-lifted-jeep-wrangler-meyer-drive-pro-plow.html
~Admin
7-11-17 Common E-47 Problems Two more pages added.
~Admin
Meyer Plow Bushing Information
~Admin
Some tips:
Buying a used Meyer EZ Plus mount plow?
~Admin
If you are considering buying a 2011 & up truck for plowing
you might want to read this.
~Admin
Pics and more info:
2017 Ford F-250 Meyer Lot Pro 7'6"Plow Install.
Also, helpful info links to the Ford Body Builder site pertaining to the Superduty trucks.
2017 Ford F-150 Meyer Drive...
http://www.smithbrothersservices.com/lifted-jeep-wrangler-meyer-drive-pro-plow.html
Three lifted Jeep Wrangler TJ's we installed Meyer Drive Pro 6' 8" plows on fall 2016.
~Admin
Here is an upgrade I did on my Lot ProLD with E-58H pump. Much neater and now the hoses and elbows are out of harms way:
http://www.meyere-58h.com/MeyerE-58H-hoses.html
~Admin
Motor solenoid needs to be replaced.
~Admin
A good explanation of what mechanical binding is, and how to fix it.
http://www.meyerplows.info/mechanical-binding.html
~Admin
2-20-08Misconception debunked!http://www.smithbrothersservices.com/meyer-plows/meyer-plow-pump-top-seal.jpg
One of the most common Meyer Plow Pump problems we hear about is the "Top Seal" leaking....
When Meyer came out with the new 22690 Pistol Grip they incorporated power out to the plow light Modules to switch on the plow lights. The Touchpad was set to be discontinued as an option. Meyer...
Yes, the A Coil is the small one on the back of the unit. It is in the same location and is the same part on the E-46, E-47, and E-57. It is the same part on the E-60 as well, but in a different...
Went 1/2" out, then back to the other side, and go 1/2", switch sides and repeat until....
133
It's out!
134
As I mentioned, you can weld the slit shut and reuse the mount. Doing this...