Results 1 to 4 of 4

Thread: Building and ST-7.5 Moldboard

  1. #1
    Administrator admin's Avatar
    Join Date
    May 2015
    Location
    Working on a Meyer Plow in NJ
    Posts
    160

    Building and ST-7.5 Moldboard

    Customer brought us an old ST-90 to be re-skinned. Since all of the ribs were rotted away it made more sense to just start over.
    Materials
    IMG_1857.jpg
    Layout
    IMG_1858.jpg

    Tack, tack, tack.
    IMG_1859.jpg
    Tack, tack, tack.
    IMG_1860.jpg

    Frame fully welded front and back.
    IMG_1877.jpg

    ~Admin

  2. #2
    Administrator admin's Avatar
    Join Date
    May 2015
    Location
    Working on a Meyer Plow in NJ
    Posts
    160
    Using new Sector to locate crossmember.
    IMG_1878.jpg

    Autograph.
    IMG_1879.jpg

    Fully welding skin on.
    IMG_1881.jpg

    All primed.
    IMG_1885.JPG

    ~Admin

  3. #3
    Administrator admin's Avatar
    Join Date
    May 2015
    Location
    Working on a Meyer Plow in NJ
    Posts
    160
    4 coats of yellow on the front.
    IMG_1891.jpg

    All gaps caulked.
    IMG_1915.jpg

    3 coats yellow on back. Area that will be blocked by Sector undercoated for additional protection.
    IMG_1925.jpg

    Undercoated.
    IMG_1926.jpg

    Next is cutting edge, and new decals.

    ~Admin

  4. #4
    Administrator admin's Avatar
    Join Date
    May 2015
    Location
    Working on a Meyer Plow in NJ
    Posts
    160
    Decals on back.
    IMG_1943.jpg

    Decal on front.
    IMG_1944.JPG

    All done!
    IMG_1945.jpg

    ~Admin

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •