-
Administrator
Meyer E-60 Hose Routing
When the unit is installed correctly on the Lift frame.
How Meyer shows to route them:
meyer-e-60-hose-routing-diagram.jpg
This is how we route them.
EZ-Classic-E-60-Hose-Routing.jpg E-60-hose-routing.jpg
Unlike the E-47, and E-57, the hoses do NOT cross. This is because the PA Block is turned 180 degrees on the E-60. It is the same PA Block used on the E-47 and E-57.
~Admin
Last edited by admin; 10-05-2016 at 12:32 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules