There is the standard Drive Pro Clevis that is used on the Wrangler, Ranger, Tacoma, etc.. There is also a Drive Pro Clevis that is designed for 1/2 ton trucks that is taller because the 1/2 ton trucks have a higher ride height.


Using the 1/2 ton Clevis on a Jeep with larger tires might work for your application. Meyer says the notch in the bottom of the Clevis should be at 9.5" but in my experience it is better at 10.5" and will work up to almost 12". Using the 1/2 ton Clevis gives you a chance to possibly mount a Drive Pro on a lifted Jeep with larger tires than stock on it.

~Admin